4-19
Chapter 4: Chassis Setup and Maintenance
Installing the Rear Backplane
1.
2. Slide the rear tray out of the back of the chassis.
Figure 4-24. Installing the Screws Securing the Rear Backplane
Figure 4-23 Installing the Rear Backplane
1
3
1
2
3. Place the rear backplane in the chassis and secure it with the three vertical
screws along the top of the backplane.
4. Secure the backplane with nine horizontal screws through the backplane.
5. Plug the power cords into the rear of the power supply, replace the chassis
cover and power up the system.
1
4
1
5
To Next Page
Loading...
