Supermicro SC847 JBOD - Page 52

SC847 JBOD Chassis Manual
4-18
Installing the Front Backplane
1. 
2. Place the front backplane in the chassis.
Figure 4-22. Installing the Screws Securing the Front Backplane
1
3
1
4
Figure 4-21. Installing the Front Backplane
1
2
3. Install the two side screws to secure the front backplane to the chassis.
4. Install the four horizontal screws along the top of the front backplane.
5. 
6. Plug the power cords into the rear of the power supply, replace the chassis
cover and power up the system.