Supermicro SSE-G24-TG4 - User Login

Supermicro L2/L3 Switches Configuration Guide
10
• User name and password
• Enable password
• Authorized managers
Defaults – Management Access
Parameter Default Value
User Name/Password/Privilege
ADMIN/ADMIN/15
stackuser/stack123/1
Privilege (
f
or configured users)
1
Enable
Password
ADMIN
IP Authorized Managers
None
1.2.1 User Login
User accounts can be configured for switch access. Each username can be associated with a password
and a privilege level. Users configured with a password are authenticated to the configured privilege
level while accessing the switch.
Users with a privilege level 1 or above can execute all “show” commands. To execute configuration
commands, access with privilege level 15 is required.
Follow the steps below to configure the username.
Step Command Description
Step 1
configure terminal
Enters the configuration mode
.
Step 2
username <user
-
name> [password <passwd>]
[privilege <1-15>]
Configure
s the
username and
password.
user-name–Alphanumeric with a
character length of 1-20
password – Alphanumeric with a
character length of 1-20
privilege - Specify 1-15 for any of the
privilege levels
Step 3
end
Exits the configuration mode.
Step 4
list users
show users
Displays the
users available in the
switch.
Displays the users that are currently
logged in.