Supermicro SSE-G24-TG4 - Security Features

Supermicro L2/L3 Switches Configuration Guide
63
Follow the steps below to clear the log file.
Step Command Description
Step 1
configure terminal
Enters the configuration mode
.
Step 2
clear log file
Clear
s the l
og
f
ile
.
Step 3
end
Exits the configuration mode.
Step 4
show logging
Displays the Syslog configuration.
Step 5
write startup
-
config
Optional step
–
saves this configuration
to be part of the startup configuration.
The example below shows the commands used to clear the log file.
SMIS# configure terminal
SMIS(config)# clear log file
SMIS(config)# end
SMIS# show logging
System Log Information
----------------------
Syslog logging: enabled(Number of messages 0)
Console logging: disabled(Number of messages 0)
File logging: disabled(Number of messages 0)
Log File Name:
File Max Entries: 500
TimeStamp option: enabled
Trap logging: Critical
Log server IP: None
Facility: Default (local0)
Buffered size: 50 Entries
LogBuffer(0 Entries)
LogFile(0 Entries)
1.8 Security Features
Supermicro switches support four methods of user authentication:
• RADIUS – Remote Authentication Dial-In User Service (RADIUS) uses AAA service for ID
verification, granting access and tracking the actions of remote users.
• TACACS – Terminal Access Controller Access Control System (TACACS) provides accounting
information and administrative control for authentication and authorization. RADIUS encrypts
only passwords, whereas TACACS encrypts usernames as well, making it more secure.