Supermicro SSE-G24-TG4 - System Logging (Syslog)

Supermicro L2/L3 Switches Configuration Guide
51
Gi0/25 Enabled Enabled
Gi0/26 Disabled Disabled
Gi0/27 Disabled Disabled
Gi0/28 Disabled Disabled
Gi0/29 Disabled Disabled
Gi0/30 Disabled Disabled
Gi0/31 Disabled Disabled
Gi0/32 Disabled Disabled
Gi0/33 Disabled Disabled
Gi0/34 Disabled Disabled
Gi0/35 Disabled Disabled
Gi0/36 Disabled Disabled
Gi0/37 Disabled Disabled
Gi0/38 Disabled Disabled
Gi0/39 Disabled Disabled
Gi0/40 Disabled Disabled
Gi0/41 Disabled Disabled
Gi0/42 Disabled Disabled
Gi0/43 Disabled Disabled
Gi0/44 Disabled Disabled
Gi0/45 Disabled Disabled
Gi0/46 Disabled Disabled
Gi0/47 Disabled Disabled
Gi0/48 Disabled Disabled
Ex0/1 Disabled Disabled
Ex0/2 Disabled Disabled
Ex0/3 Disabled Disabled
Ex0/4 Disabled Disabled
1.7 System Logging (Syslog)
Supermicro switches send system output messages to a logging process. This is called System Message
Logging (Syslog). Logging can be done at various locations:
• Console
• File
• Server
Defaults – Syslog
Parameter Default Value
Syslog status
Enabled
Logging buffer
size
50 entries
Console logging
Enabled
File Logging
Disabled