Supermicro SSE-G24-TG4 - Page 49

Supermicro L2/L3 Switches Configuration Guide
49
session is supported.
Source – monitored port
Destination – monitoring port
interface-type –may be any of the
following:
gigabit ethernet – gi
extreme-ethernet – ex
qx-ethernet – qx
vlan
interface-id –is in slot/port format for
all physical interfaces. It may be the
VLAN identifier for VLAN interfaces.
rx – Packets received on source port are
monitored (ingress).
tx – Packets transmitted on source port
are monitored (egress).
both – Packets received and
transmitted on source port are
monitored.
NOTE: Source and destination port
cannot be the same.
Step 3
end
Exits the configuration
mode.
Step 4
s
how port
-
monitoring
Displays the
port monitoring
configuration.
Step 5
write startup
-
config
Optional step
–
saves this configuration
to be part of the startup configuration.