Supermicro SUPERO X10DRW-i - Peripheral Devices

1-8
X10DRW-i/X10DRW-iT Motherboard User’s Manual
Serial (COM) Port
• One (1) Fast UART 16550 port
Peripheral
Devices
USB Devices
• Four (4) USB 3.0 ports on the rear I/O panel (USB
0/1, USB 2/3)
• Two (2) USB 3.0 ports for front access (USB 4/5)
BIOS
• 128Mb SPI AMI BIOS
®
SM Flash UEFI BIOS
• APM 1.2, APCI 2.3, ACPI 3.0/4.0, USB keyboard,
Plug & Play (PnP) and SMBIOS 2.3
Power
• ACPI/ACPM power management
Management
• Main switch override mechanism
• Power-on mode for AC power recovery
• Intel
®
Intelligent Power Node Manager 3.0 (Available
when "Supermicro Power Management (SPM)" is
installed and special power supply is used.)
• Management Engine (ME)
PC Health
PC Health/CPU Monitoring
Monitoring
• Onboard voltage monitoring for +3.3V, 3.3V standby,
+5V, +5V standby, CPU core, memory, chipset, and
battery voltages
• CPU/System overheat LED and control
• CPU Thermal Trip support
• Status Monitor for speed control
• Status Monitor for On/Off control
Fan Control
• Fan status monitoring via IPMI connections
• Dual Cooling Zone
• Low noise fan speed control
• Pulse Width Modulation (PWM) fan control
System
Management
• PECI (Platform Environment Conguration Interface)
2.0 support
• UID (Unit Identication)/Remote UID
• System resource alert via SuperDoctor 5
• SuperDoctor® 5, Watch Dog, NMI