Preface
This manual is written for system integrators, IT professionals, and
knowledgeable end-users. It provides information for the installation and use of the
X10DRW-i/X10DRW-iT motherboard.
About This Motherboard
The Super X10DRW-i(T) motherboard supports dual Intel E5-2600V3 processors
(Socket R3) that offer new Intel Microarchitecture 22nm Process Technology, de-
livering the best balanced solution of performance, power efciency, and features
to address the diverse needs of next-generation data centers. With the PCH C612
built in, the X10DRW-i(T) motherboard supports Integrated Clocking, Advanced
Management Bus Infrastructure, MCTP Protocol, and Intel® Node Manager 3.0. This
motherboard is optimized for high-performance WIO server platforms. Please refer
to our website (http://www.supermicro.com) for CPU and memory support updates.
Manual Organization
Chapter 1 describes the features, specications and performance of the moth-
erboard. It also provides detailed information about the Intel PCH C612 chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see Chapter 3, which describes trouble-
shooting procedures for video, memory, and system setup stored in the CMOS.
Chapter 4 includes an introduction to BIOS, and provides detailed information on
running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists Software Installation Instructions.
Appendix C contains UEFI BIOS Recovery instructions.
Preface
iii
To Next Page
Loading...
Need help?
General
