18
SuperServer 1029GQ-T(N/X/V)RT User's Manual
Quick Reference
Jumper
Description Default Setting
JBT1 Clear CMOS See Chapter 4
JPME2 ME ManufactureMode Pins 1-2 (Normal)
JWD1 Watch Dog Timer Enable Pins 1-2 (Reset)
Connectors Description
Battery (BT1) Onboard CMOS Battery
FAN8/FAN9 CPU/System Cooling Fan Headers
FAN_CTRL Fan 1-7 control header
FAN_PWR1 Power connector for front fans
JF1 Front control panel header
JL1 Chassis intrusion header
JP2 CPLD programming header
HDD_PWR1/2 Power connectors for HDD devices
JPWR1–4 12V 8-pin GPU power supply connectors
JRK1 RAID key header
JPSU1–2 Power supply input
JSCARD1 Micro SD card slot (reserved for manufacturer use only)
JSTBY1 Standby power header
JTPM1 TPM (Trusted Platform Module)/Port 80 Header
JTEMP1 Front control panel temperature header
JUSB3 USB 3.0 header
JVRM1/2 VRM header
(I-)SATA0–3 Intel SATA 3.0 Connectors from Intel PCH SATA controller
I-SGPIO1 Serial Link General Purpose I/O Header
M.2 Socket for M.2 SSD
LED Description State Status
LEDM1 BMC Heartbeat LED Green BMC Normal
LE2 Onboard Power LED Green Power On
LE6 Power Status LED
Green/Red
Red
Power On/Standby
To Next Page
Loading...
