9
Chapter 1: Introduction
1.2 Unpacking the System
Inspect the box in which the SuperServer 1029GQ-T(N/X/V)RT was shipped and note if it
carrier who delivered it.
Decide on a suitable location for the rack unit that will hold the server. It should be situated
in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and
Be sure to read the precautions and considerations noted in Appendix B.
In addition to the motherboard and chassis, several important parts that are included with
the system are listed below.
Main Parts List
Description Part Number Quantity
LAN Add-on Card AOM-PIO-I2XT-P 1
Air Shroud MCP-310-11807-0B 1
CPU Heatsinks SNK-P0067PS 2
Fans (4-cm) FAN-0163L4
9 (1029GQ-TRT, 1029GQ-TNRT)
7 (1029GQ-TXRT, 1029GQ-TVRT)
Hot-swap Carriers (for 2.5" HDDs) MCP-220-00047-0B 2
Rackmount Rail Kit MCP-290-11809 1
To Next Page
Loading...
