Supermicro SuperServer 1029GQ-TRT - Removing the Chassis from the Rack

Chapter 2: Server Installation
29
Figure 2-6. Removing the Chassis
Removing the Chassis From the Rack
1. Lift the auto-lock latches and pull the chassis out the front of the rack until it stops.
2. To remove the chassis from the rack completely, press the release latches on each of
the inner rails downward simultaneously and continue to pull the chassis out of the rack.
Caution!󰀨
󰀩   
from the rack or use a lift.
1
1
Stability hazard. The rack stabilizing mechanism must be in place, or the rack must

rack can cause the rack to tip over.
Note󰀨