Supermicro SuperServer 1029GQ-TRT - LED Indicators

64
SuperServer 1029GQ-T(N/X/V)RT User's Manual
4.5 LED Indicators
Ethernet Ports
The Ethernet ports on the rear I/O panel each have two LEDs. The Activity LED indicates
            󰀨   
speed of the connection.
LAN1/2 LEDs
(Connection Speed Indicator)
LED Color Denition
󰀨 100 Mb/s or none
Green 10 Gb/s
Amber 1 Gb/s
Activity LEDLink LED
LAN 1/LAN 2
IPMI LAN
(X8ST3-F)
IPMI LAN Port
The dedicated IPMI LAN is supported by the onboard AST 2500 BMC and accepts an RJ45
cable connector.
IPMI LAN Port
(Connection Speed Indicator)
LED Color Denition
Green 100 Mb/s
Amber 1 Gb/s
BMC Heartbeat LED
LEDM1 is the BMC heartbeat LED. When the LED is blinking green, BMC is functioning
normally.
Onboard Power LED
The Onboard Power LED is located at LE2 on the motherboard. When this LED is on, the
󰀨
installing components.
Unit ID LED
A rear UID LED indicator at LE1 is located near the UID switch on the back panel. This UID
