Supermicro SuperServer 1029GQ-TRT - System Headers and Connectors

56
SuperServer 1029GQ-T(N/X/V)RT User's Manual
4.2 Headers and Connectors
Fan Headers
This motherboard has two fan headers (FAN8/9) on the motherboard. This is a 6-pin fan
header, which is backward compatible with a traditional 4-pin fan. The onboard fan speed is
controlled by he onboard BMC.
Fan Header
PinDenitions
Pin# Denition
1 Ground (Black)
2 +12V (Red)
3 Tachometer
4 PWM
5 +12V
6 Groundl
TPM Header
The JTPM1 header is used to connect a Trusted Platform Module (TPM)/Port 80, a security
device that supports encryption and authentication in storage drives. It allows the motherboard
to deny access if the TPM associated with the storage drive is not installed in the system.
TPM is available from Supermicro.
Trusted Platform Module/Port 80 Header
PinDenitions
Pin# Denition Pin# Denition
1 +3.3V 2 
3  4 SPI_MISO
5 SPI_CLK 6 GND
7 SPI_MOSI 8
9 +3.3V Stdby 10 
Intel RAID Key Header
A RAID Key header is located at JRK1 on the motherboard. It supports VMD used in creating

Intel RAID Key
PinDenitions
Pins Denition
1 GND
2 PU 3.3V Stdby
3 GND
4 PCH RAID KEY