Supermicro SuperServer 1029GQ-TRT - Installing the Outer Rails on the Rack

SuperServer 2029U-TN24R4T User's Manual
26
Installing the Outer Rails on the Rack
The outer rail is actually two pieces that slide to lengthen.
Installing the Outer Rails
1. 
2. Push the rail rear bracket to the rear until it clicks into place.
Figure 2-4. Outer Rail—Exposing the Rear Bracket
Rear
3. Push the pegs on the rear bracket into the holes on the rear rack post. The rail locks
into the rack when the spring clip clicks. (Note

Figure 2-5. Outer Rail—Attaching to the Rear Rack Post
Spring Clip