Chapter 6: BIOS
73
Wait For "F1" If Error
Use this feature to force the system to wait until the 'F1' key is pressed if an error occurs.
The options are Disabled and Enabled.
INT19 (Interrupt 19) Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this item is
set to Immediate, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at bootup
immediately and allow the drives that are attached to these host adaptors to function as
bootable disks. If this item is set to Postponed, the ROM BIOS of the host adaptors will not
capture Interrupt 19 immediately and allow the drives attached to these adaptors to function
as bootable devices at bootup. The options are Immediate and Postponed.
Re-try Boot
device after its initial boot failure. The options are Disabled, Legacy Boot, and EFI Boot.
PowerConguration
Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reset or generate NMI based on
Disabled and
Enabled.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select 4
as the user presses the power button. The options are InstantOand 4 Seconds Override.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Stay Off for
power to be turned on after a power loss. Select Last State to allow the system to
and Last State.
CPUConguration
ProcessorConguration
The following CPU information will display:
• Processor BSP Revision
• Processor Socket
To Next Page
Loading...
