EasyManua.ls Logo

Supermicro SuperServer 1029GQ-TRT - Page 86

Supermicro SuperServer 1029GQ-TRT
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SuperServer 1029GQ-T(N/X/V)RT User's Manual
86
CPU1/CPU2 SLOT5 - RSC-G-A66
Slot 1 PCI-E 3.0 x16
This item enables or disables this PCIe Slot OPROM option. The options are Disabled,
Legacy, and EFI.
Slot 2 PCI-E 3.0 x16
This item enables or disables this PCIe Slot OPROM option. The options are Disabled,
Legacy, and EFI.
PCH AOM - AOM-PIO-i2XT
Intel LAN X540
This item enables or disables this PCIe Slot OPROM option. The options are Disabled,
Legacy, and EFI.
NetworkStackConguration
Network Stack

Firmware Interface) for network stack support. The options are Enabled and Disabled.
*If "Network Stack" is set to Enabled, the following items will display:
Ipv4 PXE Support
Use this feature to enable Ipv4 PXE Boot Support. If this feature is disabled, it will not
create the Ipv4 PXE Boot option. The options are Disabled and Enabled.
Ipv4 HTTP Support
Use this feature to enable Ipv4 HTTP Boot Support. If this feature is disabled, it will not
create the Ipv4 HTTP Boot option. The options are Disabled and Enabled.
Ipv6 PXE Support
Use this feature to enable Ipv6 PXE Boot Support. If this feature is disabled, it will not
create the Ipv6 PXE Boot option. The options are Disabled and Enabled.
Ipv6 HTTP Support
Use this feature to enable Ipv6 HTTP Boot Support. If this feature is disabled, it will not
create the Ipv6 HTTP Boot option. The options are Disabled and Enabled.
PXE Boot Wait Time
Use this feature to select the wait time to press the ESC key to abort the PXE boot. The
default is 0.
Media Detect Count
Use this feature to select the wait time in seconds to detect LAN media. The default is 1.

Table of Contents

Related product manuals