Supermicro SuperServer E300-8D - Page 38

38
SuperServer E300-8D User's Manual
Manufacturing Mode Select


settings.
Manufacturing Mode
Jumper Settings
Jumper Setting Denition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacturing Mode
USB Wake-Up
             



to enable this function.
USB Wake-up
Jumper Settings
Pin# Denition
1-2 Enabled (Default)
2-3 Disabled
Management Engine (ME) Recovery
Use JPME1 to select ME Firmware Recovery mode, which will limit resource allocation for
essential system operation only in order to maintain normal power operation and management.
In the single operation mode, online upgrade will be available via Recovery mode.
ME Recovery
Jumper Settings
Pin# Denition
1-2 Normal (Default)
2-3 ME Recovery
BIOS Recovery

2 for normal operation.
BIOS Recovery
Jumper Settings
Pin# Denition
1-2 Normal
2-3 BIOS Recovery