Supermicro SuperServer E300-8D - Page 54

54
SuperServer E300-8D User's Manual
If the above is set to Disable, Energy Performance BIAS Setting will display:
Energy Performance BIAS Setting
          
whatever setting is in the Operating System. The options are Performance, Balanced
Performance, Balanced Power, and Power.
Power/Performance Switch

The options are Disable and Enable.
Workload Conguration
This feature allows for optimization of workload. Balanced is recommended. The options
are Balanced and I/O Sensitive.
Program PowerCTL_MSR
PKG C-state Lat. Neg.
Use this feature to indicate whether latency should be negotiated with PCH for packaging
C-States. The options are Enable and Disable.
SAPM Control
This feature indicates whether the PCU should control the System Agent PM using its
power-performance tuning algorithm. The options are Enable and Disable.
Energy Efcient Turbo
            Enable and
Disable.
DRAM RAPL Conguration
Override BW_LIMIT_TF
This feature allows the user to turn off the "Override BW_LIMIT_TF (Time Frame)"
setting when the item "Running Average Limit for DRAM modules" (DRAM RAPL) is set
to Enabled so that the DRAM RAPL setting can work properly. The default setting is 1.
DRAM RAPL Extended Range
Use this feature to set the DRAM Running Average Power Limit (RAPL) Extended Range.
The options are Disable and Enable.