Supermicro SuperServer E300-8D - Page 80

80
SuperServer E300-8D User's Manual
Restore Defaults
To set this feature, select Restore Defaults from the Save & Exit menu and press <Enter>.
These are factory settings designed for maximum system stability, but not for maximum
performance.
Save As User Defaults
To set this feature, select Save as User Defaults from the Exit menu and press <Enter>. This
enables the user to save any changes to the BIOS setup for future use.
Restore User Defaults
To set this feature, select Restore User Defaults from the Exit menu and press <Enter>. Use

Boot Override
Listed on this section are other boot options for the system (i.e., Built-in EFI shell). Select
an option and press <Enter>. Your system will boot to the selected boot option.