17
Chapter 1: Introduction
Quick Reference Table
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal)
JPME1 ME Manufacturing Mode Pins 1-2 (Normal)
JWD1 Watchdog Timer Pins 1-2 (Reset)
LED Description Status
LEDBMC BMC Heartbeat LED Blinking Green: BMC Normal
UID-LED
Connector Description
COM1, COM2 COM Port, COM Header
FAN1 - FAN7 CPU/System Fan Headers
IPMI_LAN Dedicated IPMI LAN Port
I-SATA0 - I-SATA7 Intel® PCH SATA 3.0 Ports (with RAID 0, 1, 5, 10)
S-SGPIO1 Serial Link General Purpose I/O Connection Header
JD1 Speaker Header (Pins 1-2: Speaker)
JF1 Front Control Panel Header
JI2C_EXP1 System Management Bus (SMBus) I
2
C
JIPMB1 4-pin IPMI External I
2
C Header (for an IPMI card)
JL1 Chassis Intrusion Header
JNCSI1 NC-SI Header for IPMI Support
NVME0/1, NVME2/3 PCIe 4.0 x8 Slimline SAS Connector
JNVI
2
C NVMe I
2
C Header
JPI
2
C1 Power System Management Bus (SMB) I
2
C Header
JPWR1 8-pin Power Connector
JPWR2 4-pin Power Connector
JPWR3 24-pin ATX Power Connector
JRK1 Intel RAID Key Header
JSD1, JSD2 SATA DOM Power Connectors
JSTBY1 Standby Power Header
JVRM1, JVRM2 SMBus Clock/DATA header connected to CPU/Mem VRMs
TPM1 Trusted Platform Module/Port 80 Connector
LAN1, LAN2 LAN (RJ45) Ports
M.2-H M.2 PCIe 3.0 x4/SATA3 Slot (supports M-Key 2280 and 22110)
SXB1A, SXB1B, SXB1C Supermicro Proprietary WIO Left Add-on Card Slots
SXB2 Supermicro Proprietary WIO Right Add-on Card Slot
S-SATA0, S-SATA1 SATA 3.0 Ports with SATA DOM Power
UID-SW
To Next Page
Loading...
