Supermicro SuperServer SYS-110P-FRN2T - Checking the Server Air Flow; Overheating

51
Chapter 3: Maintenance and Component Installation
Checking the Server Air Flow
• 
• Use only recommended server parts.
• 

The control panel LEDs display system heat status. See “Control Panel” in Chapter 1 for
details.
Overheating
There are several possible responses if the system overheats.
If the server overheats:
1. Use the overheat/fan fail LED to determine the nature of the overheating condition.
2. 
3. Make sure all fans are present and operating normally.
4. Check the routing of the cables.
5. Verify that the air shroud is installed properly.