23
Chapter 2: Server Installation
Warning: Do not pick up the server with the front handles. They are designed to pull
the system from a rack only.
Figure 2-1. Identifying the Sections of the Rack Rails
Locking Tabs
Both chassis rails have a locking tab. The tabs lock the server into place when installed and
pushed fully into the rack. These tabs also lock the server in place when fully extended from
the rack. This prevents the server from coming completely out of the rack when you pull it
out for servicing.
Inner Rails
(Inner rail is preinstalled
on the chassis)
Inner Rail Locking Tabs
2.4 Identifying the Sections of the Rack Rails
The chassis package includes two rack rail assemblies in the rack mounting kit. Each as-
To Next Page
Loading...
