Supermicro SuperServer SYS-110P-FRN2T - Page 58

58
Chapter 4: Motherboard Connections
Required Connection
8-pin Power
Pin Denitions
Pin# Denition
1 - 4 Ground
5 - 8 P12V (12V Power)
8-Pin Power Connector
JPWR1 is an 8-pin 12V DC power input for the CPU that must be connected to the power

Important: To provide adequate power supply to the motherboard, be sure to connect
the 24-pin ATX PWR, the 8-pin PWR, and 4-pin PWR connectors to the power sup-
ply. Failure to do so may void the manufacturer warranty on your power supply and
motherboard.
Required Connection
4-pin Power
Pin Denitions
Pin# Denition
1 - 2 Ground
3 - 4 P12V (12V Power)
4-Pin Power Connector
JPWR2 is an 4-pin 12V DC power input for the CPU that must be connected to the power
