EasyManua.ls Logo

Supermicro SuperStorage 2029P-E1CR48H - Page 103

Supermicro SuperStorage 2029P-E1CR48H
157 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 6: UEFI BIOS
103
Port 60/64 Emulation
Select Enabled for I/O port 60h/64h emulation support, which will provide complete legacy
USB keyboard support for the operating systems that do not support legacy USB devices.
The options are Disabled and Enabled.
PCIe PLL SSC
Use this feature to enable PCI-E Phase-locked Loop (PLL) Spread Spectrum Clocking
(SSC). The options are Disable and Enable.
Server ME Conguration

Operational Firmware Version
Backup Firmware Version
Recovery Firmware Version
ME Firmware Status #1
ME Firmware Status #2
Current State
Error Code
PCH SATA Conguration
SATA Controller
This item enables or disables the onboard SATA controller supported by the Intel® PCH chip.
The options are Disable and Enable.
Congure SATA as

AHCI and
RAID.
SATA HDD Unlock
Select Enable to unlock the HDD password. The options are Disable and Enable.
Aggressive Link Power Management
When this item is set to Enable, the SATA AHCI controller manages the power usage of the
SATA link. The controller will put the link to a low power state when the I/O is inactive for an
extended period of time, and the power state will return to normal when the I/O becomes
active. The options are Disable and Enable.

Table of Contents

Related product manuals