SuperStorage 2029P-E1CR48H/L User's Manual
51
Installing a SIOM Card
The SIOM card provides options for network connection. It is inserted into a SIOM slot on the
motherboard. This installation is usually performed by a system integrator or manufacturer.
Installing a SIOM Card
1. Power down the system.
Figure 3-12. SIOM Card Position on Chassis Rear
Cover Retaining Screw
2. Remove the small section of the chassis rear to allow access to the motherboard SIOM
slot. Unscrew the single retaining screw to remove the cover.
3. Position the card with its cover bracket in front of the SIOM slot and gently push in both
sides of the card until it slides into the slot.
4. Secure the SIOM card cover bracket to the chassis with the screw.
SIOM card with the
bracket installed
Insert the SIOM
card into this slot
Figure 3-13. Inserting SIOM Card
To Next Page
Loading...
