14
SuperStorage 2029P-E1CR48H/L User's Manual
Quick Reference Table
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal)
JPME2 Manufacturing Mode Select Pins 1-2 (Normal)
JVRM_SEL1 VRM SMBus Clock (to BMC or PCH) Pins 1-2 (BMC, Normal)
JWD1 Watch Dog Timer Enable Pins 1-2 (Enabled, Reset)
Connector Description
COM1 Back panel COM port
FAN1-5 System cooling fan headers
IPMI_LAN Dedicated IPMI LAN port
I-SATA0-3 SATA 3.0 connection header supported by the Intel® PCH
I-SATA2/I-SATA3
I-SATA Ports with built-in power pins and with support of Supermicro SuperDOM (Disk On Module)
devices
I-SGPIO1 Serial Link General Purpose I/O Header
JBAT1 Onboard CMOS battery socket
JF1 Front Control Panel header
JI2C_EXP1/2 System Management Bus (SMBus) I2C for SAS3 backplanes
JI2C_FP1 System Management Bus (SMBus) I2C for LCD devices
JIPMB1 4-pin BMC External I
2
C header (for an IPMI-supported card)
JL1 Chassis Intrusion header
(CPU1) JMEZZ1/JMEZZ2
PCI-E
PCI-Express 3.0 x8 Add-On-Module (AOM) slot from CPU1 for mezzanine card support (See the
note below)
JNVI
2
C1/JNVI
2
C2
NVMe SMBus (I
2
C) headers used for PCI-E hot-plug SMBus clock & data connections (an SMCI-
proprietary NVMe add-on card and cable are required; available for a Supermicro complete system
only)
JPI
2
C1 Power Supply SMBus I
2
C header
JPWR2/JPWR3 8-pin Power Supply connectors
JPWR1 24-pin ATX main power supply connector
JRK1 Intel® RAID Key header for NVMe SSD
JSD1/JSD2 SATA DOM Power Connectors 1/2
JSDCARD1 Micro SD Card Slot (reserved by manufacturer)
JSEN1 Inlet Sensor Header
JSTBY1 Standby power header
JTPM1 Trusted Platform Module (TPM)/Port 80 connector
P1_NVMe0-3 NVM Express PCI-E 3.0 x4 ports (ports 0-3) supported by CPU1
(CPU1) SIOM PCI-E PCI-Express 3.0 x16 slot from CPU1 for SMCI SIOM add-on module support
(CPU2) SLOT1 PCI-Express 3.0 x8 Slots supported by CPU2
(CPU2) SLOT2/SLOT3 PCI-Express 3.0 x16 Slot supported by CPU2
SP1 Internal Speaker/Buzzer
UID
USB0/1 Back panel USB 3.0 Ports
To Next Page
Loading...
