8
SuperStorage 2029P-E1CR48H/L User's Manual
Chapter 1
Introduction
1.1 Overview
This chapter provides a brief outline of the functions and features of the SuperStorage
2029P-E1CR48H/L. The 2029P-E1CR48H/L is a high-end solution comprised of two main
subsystems: the SC226STS-R1K62P1 2U chassis and the X11DSC+ dual processor
It is useful for IOPS-intensive storage applications, database applications such as MySQL
or Casandra, virtual storage environments, single instance storage and data de-duplication.
In addition to the motherboard and chassis, several important parts that are included with the
Main Parts List
Description Part Number Quantity
12G 2.5 x 2 drive kit with status LED MCP-220-82616-ON 1
2U 24-port expander backplane supporting 20 x 2.5" SAS3/SATA3 HDD/SSD
and 4 x 2.5" SAS3/SATA3/NVMe storage drives
BPN-SAS3-
226SEL1-N4
2
1U passive CPU heat sinks for X11 with Narrow Retention Mechanism SNK-P0067PS 2
SAS3 ROC Mezzanine add-on card (2029P-E1CR48H only) AOM-S3108M-H8L-P 1
Mezzanine card with LSI 3008 SAS3 controller (2029P-E1CR48L only) AOM-S3008M-L8-P 1
Air shroud MCP-310-00077-0B 1
Rail set MCP-290-00142-0N 1
Black Gen. 3 hot-swap 2.5" HDD trays MCP-220-00047-0B 48
65-cm, 26AWG, 4-pin to 4-pin I2C cable CBL-PWEX-0760 1
80 x 80 x 38-mm middle cooling fans FAN-0168L4 5
1.2 Unpacking the System
Inspect the box the SuperStorage 2029P-E1CR48H/L was shipped in and note if it was
the carrier who delivered it.
Decide on a suitable location for the rack unit that will hold the server. It should be situated
in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and
Be sure to read the precautions and considerations noted in Appendix B.
To Next Page
Loading...
