40
Chapter 3: Maintenance and Component Installation
DIMM Installation
1. Follow the instructions given in the
memory population guidelines listed in
the previous sections to install memory
modules on your motherboard. For the
system to work properly, please use
memory modules of the same type and
speed on the motherboard. (See the Note
below.)
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press the
DIMM module straight down into the slot
until the module snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
Release Tabs
Notches
Insert the DIMM module into the memory slot.
S-SGPIO1
JI2C_FP1
JITP1
JPW3
JPW2
JPW1
FAN1
FAN2
FAN4FAN5
FAN3
HDD_LED1
LED_E3
LED_E2
LED_F1
LED_E1
LED_G1
LED_A1
LED_G2
LED_G3
LED_H1
LED_H3
LED_H2
LED_F2
LED_F3
LED_C3
LED_D1
LED_C2
LED_D3
LED_D2
LED_B3
LED_B2
LED_A3
LED_A2
LED_B1
LED_C1
JWD1
JPME2
JVRM1
JVRM2
JPG1
JPB1
JSD1
JSD2
JL1
SP1
JBAT1
JF1
JTPM1
PLD1
LED2
LED1
JI2C_EXP1JNVI2C1
JI2C_EXP2 JNVI2C2
JIPMB1
BIOS
LICENSE
BAR CODE
IPMI CODE
REV:1.01
X10DSC+
X16PCI-E 3.0CPU1 SIOM
S-SATA3
TPM/PORT80
USB2(3.0)
S-SATA0
S-SATA1
CPU2 SLOT1 PCI-E 3.0 X8
CPU2 SLOT2 PCI-E 3.0 X16
CPU2 SLOT3 PCI-E 3.0 X16
CPU-XDP
CPU1 JMEZZ1 PCI-E 3.0x8
IPMI_LAN
CPU2_MEMORY_LED
CPU1_MEMORY_LED
USB0/1(3.0)
P2-DIMME2
P2-DIMME1
P2-DIMME3
P2-DIMMF1
P2-DIMMF2
P2-DIMMF3
S-SATA2
UID
CPU2
P1_NVMe#0
P1_NVMe#1
P1_NVMe#2
P1-DIMMA2
P1-DIMMA3
P1-DIMMB1
P1-DIMMA1
P1-DIMMB2
P1-DIMMB3
P1_NVMe#3
P1-DIMMD1
P1-DIMMD2
CPU1
P1-DIMMD3
P1-DIMMC1
P1-DIMMC2
P1-DIMMC3
P2-DIMMH3
P2-DIMMG3
P2-DIMMH1
P2-DIMMH2
P2-DIMMG1
P2-DIMMG2
JBT1
BMC_HB_LED1
BMC
BIOS
PCH
1
1
1
1
Battery
JUIDB2
DIMM Module Removal
Press the release tabs on both ends of the DIMM socket to release the DIMM module from
the socket as shown in the drawing on the right.
Warning! 1. T to avoid damage to the DIMM module or the DIMM socket, do not use excessive
force when pressing the release tabs on the ends of the DIMM socket. 2. Handle DIMM
modules with care. Carefully follow all the instructions given in Section 1 of this user guide to
avoid ESD-related damage to your components or system. 3. All graphics, including the layout
drawing above, are for reference only. Your system components may or may not look the same
as shown in this user guide.
To Next Page
Loading...
