28
Chapter 3: Maintenance and Component Installation
3.3 Processor and Heatsink Installation
Processor and Heatsink Installation
heatsink module (PHM), and then install the PHM into the CPU socket.
Caution: Use ESD protection. Do not touch the underside of the CPU. Improper installation
or socket misalignment can cause serious damage to the CPU or socket which may require
manufacturer repairs.
Notes:
•
• When handling the processor package, avoid placing direct pressure on the label area of
the CPU or socket.
• Check that the plastic socket dust cover is in place and none of the socket pins are bent—
otherwise, contact your retailer.
• Refer to the Supermicro website for updates on CPU support.
•
The Intel® Xeon® 81xx/61xx/51xx/41xx/31xx and
82xx/62xx/52xx/42xx/32xx series Series Processors
Note: All graphics, drawings, and pictures shown in this manual are for illustration only. The
components that came with your machine may or may not look exactly the same as those
shown in this manual.
Intel® Processor (Non-F Model)
Note: The Intel® Xeon® 81xx/61xx/51xx/41xx/31xx and 82xx/62xx/52xx/42xx/32xx
series processors contain two models - the F model processors and
the Non-F model processors. This motherboard supports the Non-
F model processors only.
To Next Page
Loading...
