Supermicro SuperStorage 2029P-E1CR48H - Page 107

Chapter 6: UEFI BIOS
107
Network Stack Conguration
Network Stack

support. The options are Disabled and Enabled.
*If the item above "Network Stack" is set to Enabled, the following items will be
displayed:
Ipv4 PXE Support
Select Enabled to enable Ipv4 PXE boot support. The options are Disabled and Enabled.
Ipv4 HTTP Support
Select Enabled to enable Ipv4 HTTP boot support. The options are Disabled and Enabled.
Ipv6 PXE Support
Select Enabled to enable Ipv6 PXE boot support. The options are Disabled and Enabled.
Ipv6 HTTP Support
Select Enabled to enable Ipv6 HTTP boot support. The options are Disabled and Enabled.
PXE boot wait time
Use this option to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is 0.
Media detect count
Use this option to specify the number of times media will be checked. Press "+" or "-" on
your keyboard to change the value. The default setting is 1.
Super IO Conguration
Super IO Conguration
The following Super IO information will be displayed:
• Super IO Chip AST2500
Serial Port 1 Conguration
Serial Port 1 Conguration

Serial Port 1
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.