SuperStorage 2029P-E1CR48H/L User's Manual
55
7. Connect the four CBL-SAST-0929 cables from the motherboard P1_NVMe0 - P1_
NVMe3 ports to the second backplane's JSM4 – JSM7 ports respectively as shown
below. Please notice that the arrangement of ports on the backplane is not in sequence
due to design limitations.
8. The four NVMe drives have to be installed in the last four slots of the second backplane,
namely slots 44-47. In addition, it is recommended that you always install the NVMe
9. Please follow installation instruction from section “Installing a Hard Disk Drive” for drive
tray installation.
Figure 3-19. NVMe Ports
JSM7 JSM6 JSM5 JSM4
To Next Page
Loading...
