Supermicro SuperStorage 2029P-E1CR48H - Page 71

71
Chapter 4: Motherboard Connections
LAN1/LAN2 LED
Pin Denitions (JF1)
Pin# Denition
9 NIC 2 Activity LED
10 3.3V Stby
11 NIC 1 Activity LED
12 3.3V Stby
HDD LED
Pin Denitions (JF1)
Pins Denition
13 3.3V Stdby
14 HDD Active
Power LED
Pin Denitions (JF1)
Pins Denition
15 3.3V
16 PWR LED
NMI Button
Pin Denitions (JF1)
Pins Denition
19 Control
20 Ground
NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Controller) LED connection for LAN port 1 is located on pins
11 and 12 of JF1, and LAN port 2 is on pins 9 and 10. Attach the NIC LED cables here to

HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach a cable to pin 14 to

Power LED
The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table below for

NMI Button
The non-maskable interrupt (NMI) button header is located on pins 19 and 20 of JF1. Refer
