Supermicro SuperStorage 2029P-E1CR48H - Page 92

SuperStorage 2029P-E1CR48H/L User's Manual
92
󰀨󰀨
The options are Disable and Enable.
2X Refresh Options
Use this item to select the 2X refresh mode. The options are Auto and Enable.
Page Policy
This feature allows the user to determine the desired page mode for IMC. When Auto is
selected, the memory controller will close or open pages based on the current operation.
Closed policy closes that page after reading or writing. Adaptive is similar to open page
Auto, Closed, and Adaptive..
IMC Interleaving

settings. The options are Auto, 1-way Interleave, and 2-way Interleave.
Memory Topology
The item displays the information of onboard memory modules as detected by the
BIOS.
Memory RAS (Reliability_Availability_Serviceability) Conguration
Memory RAS Conguration Setup

Static Virtual Lockstep Mode
Select Enable to support the static virtual lockstep mode. The options are Disable
and Enable.
Mirror Mode
Use this item to select the mirror mode. The options are Disable, Mirror Mode 1LM,
and Mirror Mode 2LM. If this item is set to Mirror Mode 1LM or Mirror Mode 2LM, the
available memory capacity will be reduced by 50 percent.