Supermicro X10DRS-2U - Page 16

1-8
X10DRS-2U/3U/4U Motherboard User’s Manual
KVM (JKVM1) Support on the IO Back Panel
The JKVM1 port supports the following via IPMI 2.0:
• Two (2) USB 2.0 connections (USB 2.0 1/2)
• One (1) COM port
• One (1) VGA port
Note: An SMCI-proprietary backplane (BPN-
SAS3-937 or BPN-SAS3-927-N4 for 2U/3U,
BPN-SAS3-947 for 4U) and cable (CBL-0218L)
are required.
Peripheral
Devices
USB Devices
• Two (2) USB 2.0 ports on the rear I/O panel (USB
0/1) via IPMI 2.0
Note: An SMCI-proprietary backplane (BPN-
SAS3-937 or BPN-SAS3-927-N4 for 2U/3U,
BPN-SAS3-947 for 4U) and cable (CBL-0218L)
are required.
• One (1) USB 3.0 port (USB 3) onboard
BIOS
• 16 MB SPI AMI BIOS
®
SM Flash UEFI BIOS
• APM 1.2, APCI 2.3, ACPI 3.0/4.0, USB Keyboard/
Video/Mouse support via IPMI (JKVMB1), Plug &
Play (PnP), SCM, SPM, SUM-Inband, SUM-OOB,
IPMIView, SMCIPMITOOL, PCI Firmware 3.0, RTC
(Real-Time-Clock) wakeup, and SMBIOS 2.7 & later
Power
• ACPI/ACPM power management
• Server platform service
Management
• Main switch override mechanism
• Riser-card auto detection
• S5 support
• Power-on mode for AC power recovery
• Intel
®
Intelligent Power Node Manager 3.0 (Avail-
able when the Supermicro Power Manager [SPM]
is installed and special power supply used. See the
note on page 1-14.)
• Management Engine (ME)
CPU
CPU Monitoring
Monitoring
• Onboard voltage monitoring for +3.3V, 3.3V Standby,
+5V, +5V Standby, +12V, CPU core, memory, chipset,
BMC, and battery voltages
• One (1) internal USB 2.0 header for two (2) USB connections for
front panel support (USB 2/3)
• One (1) internal USB 3.0 header for two (2) USB connections for
front panel support (USB 7/8)
• One (1) USB 3.0 Type A connector (USB 6)