Supermicro X10SRG-F - Page 19

Chapter 1: Introduction
1-5
X10SRG-F Motherboard Connectors
Connector Description
COM1/COM2 COM1: Rear Serial Port, COM2: Serial Header
FAN1~FAN4 System/CPU Fan Connectors
FAN A~FAN D I/O Fan Connectors
JD1 Speaker/Buzzer (Pins 1-3: Power LED, Pins 4-7: Speaker)
JF1 Front Panel Control Header
JI2C1 Power Supply SMBus I2C Header
JIPMB1 4-pin External BMC I2C Header
JL1 Chassis Intrusion Header
JOH1 Overheat LED/Fan Fail LED Header
JPW1 20-pin Main Power Connector
JPW2 8-pin Secondary Power Connector for the GPU
JPW3 8-pin 3rd Power Connector for the GPU (use as needed)
JSD1/JSD2 SATA Disk On Module (DOM) Power Connector
JSTBY1 Legacy Wake On LAN Header
JTPM1 Trusted Platform Module (TPM) Header
LAN1/LAN2 Gigabit RJ45 Ports
I-SATA0~I-SATA5 SATA 3.0 Connectors via Intel (6Gb/s)
S-SATA0~S-SATA3 SATA 3.0 Connectors via PCH (6Gb/s)
SLOT3 Slot for Supemicro riser card P/N RSC-R1UG-UR
SP1 Internal Speaker/Buzzer
SXB1A, SXB1B Slot for Supermicro riser card P/N RSC-R1UG-E16-UP,
RSC-R1UG-2E8G-UP
SXB2A, SXB2B Slot for Supermicro riser card P/N RSC-R1UG-E16R-UP,
RSC-R1UG-2E8GR-UP
I-SGPIO1, I-SGPIO2,
S-SGPIO
Serial Link General Purpose I/O Headers (5V Gen1/Gen
2)
UID SW Unit ID Switch
USB0, USB1 Rear USB Ports
USB2/3, USB4/5,
USB6/7, USB8/9
Internal USB Headers
VGA1 Rear VGA Port