Supermicro X10SRG-F - BMC and Manufacturer Mode Jumpers

2-32
X10SRG-F Motherboard User’s Manual
Manufacturer Mode Select
(JPME2)
Close this jumper to bypass SPI ash
security and force the system to use
the Manufacturer Mode, which will
allow the user to ash the system
rmware from a host server to modify
system settings. See the table on the
right for jumper settings.
Manufacturer Mode (JPME2)
Jumper Settings
Setting Denition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacture Mode
BMC Enable/Disable (JPB1)
JPB1 is used to enable or disable
the BMC (Baseboard Management
Control) chip and the onboard IPMI
port. This jumper is used together with
the IPMI settings in the BIOS. See the
table on the right for jumper settings.
BMC IPMI Enable/Disable
(JPB1) Jumper Settings
Setting Denition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
A. BMC Enable/Disable
B. Manufacture Mode Select
X10SRG-F
REV:1.01
DESIGNED IN USA
BIOS
LICENSE
MAC CODE
IPMI CODE
BAR CODE
4
1
JVRM2
JVRM1
Intel C610
BMC
i350
JUIDB1
FAND
FAN4
FAN3
FAN2
FAN1
FANC
FANA
FANB
JTPM1
JL1
JOH1
LE2
LE1
LEDM1
S-SATA3
S-SATA2 S-SATA1
S-SATA0
I-SATA4
I-SATA3
I-SATA5
I-SATA2I-SA
TA1
I-SATA0
JSTBY1
JPCIE2
JPCIE3
JSD1
JSD2
JPW3
JPW2
JPW1
I-SGPIO2
I-SGPIO1
S-SGPIO
JIPMB1
JP3
JD1
JPI2C1
JPL1
JPB1
JI2C2
JWD1
JPME2
JI2C1
JBRSET1
JBR1
JPL_LAN1
JPL_LAN0
JPL_LOM_DEV_OFF
JPG1
JVR1
JPF1
JPF2
BT1
SP1
JP4
JITP1
J23
JPCIE3
JF1
SXB1B
USB 8/9(3.0)
USB 6/7
USB 4/5
USB 2/3
SATA DOM+POWER
SATA DOM+POWER
UID-SW
COM2
IPMI_LAN
VGA
CPU SLOT3 PCI-E 3.0 X8(IN X16)
SXB2B
SXB2A
SXB1A
JBT1
PWR
JF1
ON
RST
2
NIC
1
NIC
FF
OH
LEDLED
PWRHDDXNMI
DIMMB2 DIMMA1 DIMMB1 DIMMA2
LAN1
LAN2
DIMMD2 DIMMC1 DIMMD1 DIMMC2
COM1
USB 0/1(3.0)
CPU
LGA2011-3
1
1
B
A