Supermicro X10SRG-F - Front Panel LED Pin Definitions

Chapter 2: Installation
2-19
Power Button
OH/Fan Fail LED
1
NIC1 LED
Reset Button
2
Power Fail LED
HDD LED
Power LED
Reset
PWR
P3V3
UID SW
P3V3_STB
UID LED
Ground
Ground
1920
P3V3
X
Ground
NMI
X
P3V3_STB
NIC2 LED
Front Control Panel Pin Denitions
Power LED
The Power LED connection is located
on pins 15 and 16 of JF1. Refer to the
table on the right for pin denitions.
Power LED
Pin Denitions (JF1)
Pin# Denition
15 +5V
16 Ground
A. PWR LED
B. HDD LED
C. PWR Fail LED
A
B
HDD LED
The HDD LED connection is located
on pins 13 and 14 of JF1. Attach a
cable here to indicate the status of
HDD-related activities, including IDE,
SATA activities. See the table on the
right for pin denitions.
HDD LED
Pin Denitions (JF1)
Pin# Denition
13 +5V
14 HD Active
Power Fail LED
The Power Fail LED connection is
located on pins 5 and 6 of JF1. Refer
to the table on the right for pin deni-
tions.
PWR Fail LED
Pin Denitions (JF1)
Pin# Denition
5 Vcc
6 Ground
C
Power LED
Status
State Denition
Off System Off
On System Running
HDD LED
Status
State Denition
Off No Activity
Blinking HDD Busy
Power Fail LED
Status
State Denition
Off Normal
On Power Failure