Supermicro X10SRG-F - Front Panel LED Pin Definitions (Cont.)

2-20
X10SRG-F Motherboard User’s Manual
Power Button
OH/Fan Fail LED
1
NIC1 LED
Reset Button
2
Power Fail LED
HDD LED
Power LED
Reset
PWR
P3V3
UID SW
P3V3_STB
UID LED
Ground
Ground
1920
P3V3
X
Ground
NMI
X
P3V3_STB
NIC2 LED
NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Control-
ler) LED connection for LAN port 1
is located on pins 11 and 12 of JF1,
and the LED connection for LAN Port
2 is on Pins 9 and 10. NIC1 LED and
NIC2 LED are 2-pin NIC LED head-
ers. Attach NIC LED cables to NIC1
and NIC2 LED indicators to display
network activity. Refer to the table on
the right for pin denitions.
LAN1/LAN2 LED
Pin Denitions (JF1)
Pin# Denition
9/11 Vcc
10/12 Ground
C
A. NIC1 LED
B. NIC2 LED
C. OH/Fan Fail/UID LED
OH/Fan Fail/Blue UID
LED Pin Denitions (JF1)
Pin# Denition
7 Blue UID LED
8 Red_LED-Cathode/OH/Fan Fail
OH/Fan Fail
LED Status (Red LED)
State Denition
Off Normal
On Overheat
Flashing
1 Hz
Fan Fail
A
B
Overheat (OH)/Fan Fail/Unit ID
LED
Connect an LED cable to pins 7 and 8
of the Front Control Panel to use the
Unit ID LED, Overheat, and Fan Fail.
Refer to the table on the right for pin
denitions.
NIC LED
Status
State Denition
Off No Activity
Blinking NIC Busy
Blue UID LED
Status
State Denition
Off UID Off
On UID On