Supermicro X10SRG-F - Ethernet, IPMI, and Serial Ports

2-16
X10SRG-F Motherboard User’s Manual
A
Ethernet Ports (LAN1/LAN2)
Two Ethernet ports (LAN1/LAN2) are
located next to the USB ports on the
I/O backpanel. These ports provide
networking connectivity with speeds
up to 1Gb/s. Please see the table on
the left for the pin denitions.
LAN Ports
Pin Denition
Pin# Denition Pin# Denition
1 TD0- 10 SGND
2 TD0+ 11 P3V3SB
3 TD1- 12 Act LED
4 TD1+ 13 Link 100 LED
(Green, +3V3SB)
5 TD2- 14 Link 1000 LED
(Yellow, +3V3SB)
6 TD2+ 15 Ground
7 TD3- 16 Ground
8 TD3+ 17 Ground
9 P2V5SB 18 Ground
(NC: No Connection)
1. IPMI Port
2. LAN1
3. LAN2
4. COM1
A. COM2
Serial Ports
One COM port (COM1) is provided
on the motherboard, located on the
I/O backpanel. In addition to the
COM port, a COM header (COM2) is
located next to the VGA port. See the
table on the right for pin denitions.
Serial Ports-COM1
Pin Denitions
Pin # Denition Pin # Denition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 N/A
IPMI Port (IPMI)
In addition to the two Ethernet ports
(LAN1/LAN2) this motherboard also
features an IPMI port. This provides
remote system management ac-
cess through a standard IP protocol
network.
1
2 3
4
X10SRG-F
REV:1.01
DESIGNED IN USA
BIOS
LICENSE
MAC CODE
IPMI CODE
BAR CODE
4
1
JVRM2
JVRM1
Intel C610
BMC
i350
JUIDB1
FAND
FAN4
FAN3
FAN2
FAN1
FANC
FANA
FANB
JTPM1
JL1
JOH1
LE2
LE1
LEDM1
S-SATA
3
S-SATA2
S-SATA1
S-SATA0
I-SATA4
I-SATA3
I-SATA5
I-SATA2I-SATA1
I-SATA0
JSTBY1
JPCIE2
JPCIE3
JSD1
JSD2
JPW3
JPW2
JPW1
I-SGPIO2
I-SGPIO1
S-SGPIO
JIPMB1
JP3
JD1
JPI2C1
JPL1
JPB1
JI2C2
JWD1
JPME2
JI2C1
JBRSET1
JBR1
JPL_LAN1
JPL_LAN0
JPL_LOM_DEV_OFF
JPG1
JVR1
JPF1
JPF2
BT1
SP1
JP4
JITP1
J23
JPCIE3
JF1
SXB1B
USB 8/9(3.0)
USB 6/7
USB 4/5
USB 2/3
SATA DOM+POWER
SATA DOM+POWER
UID-SW
COM2
IPMI_LAN
VGA
CPU SLOT3 PCI-E 3.0 X8(IN X16)
SXB2B
SXB2A
SXB1A
JBT1
PWR
JF1
ON
RST
2
NIC
1
NIC
FF
OH
LEDLED
PWRHDDXNMI
DIMMB2 DIMMA1 DIMMB1 DIMMA2
LAN1
LAN2
DIMMD2 DIMMC1 DIMMD1 DIMMC2
COM1
USB 0/1(3.0)
CPU
LGA2011-3
1
1