Supermicro X10SRM-F - Page 54

54
X10SRM-F/-TF User Manual
IPMI_LAN
USB0/1
LAN1
LAN2
USB6/7
(3.0)
JPL1
JSTBY1
JPG1
JTPM1
COM2
COM1
FAN4
JF1
JPH1
JPV1
JPW1
FAN1
JPI2C1
FAN2
FAN3
FANA
JPUSB1
USB10 (3.0)
USB8/9 (3.0)
USB4/5
I-SGPIO2
I-SGPIO1
JS1
JL1
USB2/3
JP3
JWD1
JPME2
JI2C2
JI2C1
JPB1
JBT1
BT1
JMD1
JNVI2C1
JIPMB1
LEDBMC
LEDPWR
LE8
LE1
JUIDB1
VGA
JPCIE4 JPCIE5
JPCIE6
CPU1 SLOT6 PCI-E 3.0 X16
CPU1 SLOT5 PCI-E 3.0 X8
CPU1 SLOT4 PCI-E 3.0 X8
FAN5
I-SATA3
SP1
I-SATA2
I-SATA1
I-SATA0
I-SATA5
I-SATA4
JSD2
JSD1
JPH2
DIMMA1 DIMMB1
DIMMD1 DIMMC1
CLOSE 1st
OPEN 1st
MAC CODE
BAR CODE BAR CODE
CPU
INTEL PCH
LAN
CONTROLLER
X10SRM-F/-TF
REV:1.01
Designed in the USA
SRW5
SRW4
SRW3
JVRM2 JVRM1
JOH1
JD1
SATA Ports
Six SATA 3.0 ports are located on the X10SRM-F/-TF motherboard, supported by the Intel
C612 PCH chip. These SATA ports support RAID 0, 1, and 10. SATA ports provide serial-link
signal connections, which are faster than the connections of Parallel ATA. Refer to the tables
below for pin denitions.
Note 1: I-SATA4 and I-SATA5 are Supermicro SuperDOMs. These are yellow SATA-
DOM connectors with power pins built in and do not require separate external power
cables. These connectors are backwards-compatible with non-Supermicro SATADOMS
that require an external power supply.
Note 2: For more information on the SATA HostRAID conguration, please refer to the
Intel SATA HostRAID user's guide posted on our website at http://www.supermicro.com.
1
2
1. I-SATA0
2. I-SATA1
3. I-SATA2
4. I-SATA3
5. I-SATA4
6. I-SATA5
5
6
4
3
SATA 3.0 Port
Pin Denitions
Pin# Signal
1 Ground
2 SATA_TXP
3 SATA_TXN
4 Ground
5 SATA_RXN
6 SATA_RXP
7 Ground
X10SRM-F/-TF SATA 3.0 Connector Types
Port # Connection Type
I-SATA0~3 (Four)
SATA 3.0/6 Gb/s
RAID 0, 1, 10
I-SATA4~5 (Two)
SATA 3.0/6 Gb/s
RAID 0, 1, 10
SuperDOM connectors
Supported by Intel C612 PCH