Supermicro X11SPM-F - Quick Reference Table

14
Super X11SPM-F/-TF/-TPF User's Manual
Note: Table is continued on the next page.
Quick Reference Table
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPME1 ME Recovery Pins 1-2 (Normal)
JPME2 ME Manufacturing Mode Pins 1-2 (Normal)
JPUSB1 Power Source Select For USB Port 0/1/6/7 Pins 1-2 (Standby)
JWD1 Watchdog Timer Pins 1-2 (Reset)
LED Description Status
BMC_HB_LED1 BMC Heartbeat LED Blinking Green: Device Working
LEDPWR Onboard Power LED Solid Green: Power On
UID_LED1 UID LED Solid Blue: Unit Identied
Connector Description
BT1 Onboard Battery
COM1, COM2 COM Port, COM Header
FAN1 ~ FAN6, FANA, FANB CPU/System Fan Headers
IPMI_LAN Dedicated IPMI LAN Port
I-SATA0~7, S-SATA0~3 Intel PCH SATA 3.0 Ports (with RAID 0, 1, 5, 10)
J18 External RTC Battery Header
JD1 4-pin Speaker Header
JF1 Front Control Panel Header
JIPMB1 4-pin BMC External I
2
C Header (for an IPMI card)
JL1 Chassis Intrusion Header
JMD1 M.2 PCI-E 3.0 x4 Slot (Supports M-Key 2280 and 2242)
JNVI
2
C1 NVMe I
2
C Header
JPH1 4-pin Power Connector for HDD
JPI
2
C1 Power System Management Bus (SMB) I
2
C Header
JPV1 8-pin 12V CPU Power Connector
JPW1 24-pin ATX Power Connector
JRK1 Intel RAID Key Header
JSD1, JSD2 SATA DOM Power Connectors
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module/Port 80 Connector
JUIDB1 Unit Identier (UID) Switch
LAN1, LAN2
1G BASE-T Ports (for X11SPM-F)
10G BASE-T Ports (for X11SPM-TF)
10G SFP+ Ports (for X11SPM-TPF)