Supermicro X11SPM-F - Network Stack Configuration

Super X11SPM-F/-TF/-TPF User's Manual
92
VGA Priority
Use this feature to select VGA priority when multiple VGA devices are detected. Select On-
board to give priority to your onboard video device. Select Offboard to give priority to your
graphics card. The options are Onboard and Offboard.
CPU1 SLOT4 PCI-E 3.0 X16 OPROM
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
CPU1 SLOT6 PCI-E 3.0 X16 OPROM
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
CPU1 SLOT7 PCI-E 3.0 X8 OPROM
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
M.2 PCI-E 3.0 X4 OPROM
Use this feature to select which rmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
Onboard LAN Device
Select Enabled to enable the Onboard LAN device. The options are Enabled and Disabled.
Onboard LAN1 Option ROM
Use this feature to select which rmware function to be loaded for LAN Port1 used for system
boot. The options are Disabled, Legacy, and EFI.
Onboard LAN2 Option ROM
Use this feature to select which rmware function to be loaded for LAN Port2 used for system
boot. The options are Disabled, Legacy, and EFI.
Onboard Video Option ROM
Use this item to select the Onboard Video Option ROM type. The options are Disabled,
Legacy, and EFI.
Network Stack Conguration
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unied Extensible
Firmware Interface) for network stack support. The options are Enabled and Disabled.