Supermicro X11SPM-F - DIMM Installation; DIMM Removal

36
Super X11SPM-F/-TF/-TPF User's Manual
+
PCB EDGE
PRESS FIT
1
1
DESIGNED IN USA
MAC CODE
X11SPM-F/-TF/-TPF
REV: 1.01
BAR CODE
Intel
PCH
JPV1
BT1
S-SGPIO1
S-SATA0
S-SATA1
S-SATA3
S-SATA2
JPH1
J18
COM2
JTPM1
JSTBY1
UID_LED1
LEDPWR
JIPMB1
JNVI2C1
JD1
JF1
JPI2C1
BMC_HB_LED1
LEDT2
LEDT1
LEDT3
LEDT4
JUIDB1
FANB
FAN5
FAN6
FAN2
FAN1
FAN4
FANA
FAN3
JPW1
SRW4
SRW3
JMD1
JSD1
JSD2
JRK1
JL1
JBT1
JPME2
JPUSB1
JWD1
JPG1
JPME1
COM1
VGA
LAN1/2
(-TF)
USB6/7
(3.0)
IPMI_LAN
USB0/1
JF1
NMI
X
LED
NIC1
X
LED
HDD
PWR
NIC2
OH/
FF
RST
ON
PWR
CPU1 SLOT7 PCI-E 3.0 X8
CPU1 SLOT6 PCI-E 3.0 X16
CPU
USB8/9(3.0)
USB10(3.0)
I-SATA4-7
I-SATA0-3
USB4/5
USB2/3
CPU1 SLOT4 PCI-E 3.0 X16
LAN1/2
(-F/-TPF)
DIMMC1 DIMMB1 DIMMA1
DIMMF1 DIMME1 DIMMD1
ASpeed
AST2500
Intel
X557
(-TF)
Inphi
CS4227
(-TPF)
Marvell
88E1512
(-F)
DIMM Installation
1. Insert the desired number of DIMMs
into the memory slots in the following
order: DIMMA1, DIMMD1, DIMMB1,
DIMME1, DIMMC1, DIMMF1. For the best
performance, please use the memory
modules of the same type and speed.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Press the notches on both ends of the
module straight down into the slot until the
module snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
DIMM Removal
Press both release tabs on the ends of the
DIMM module to unlock it. Once the DIMM
module is loosened, remove it from the
memory slot.
Release Tabs
Notches
Press both notches
straight down into
the memory slot.