16
Super X11SPM-F/-TF/-TPF User's Manual
Note: The table above is continued on the next page.
Motherboard Features
CPU
• Supports an Intel® Xeon 81xx/61xx/51xx/41xx/31xx series (Socket P0-LGA3647) processor with up to 28 cores and a
thermal design power (TDP) of 165W
Note: The X11SPM-F/-TF/-TPF motherboard does not support FPGA or Fabric processors.
Memory
• Up to 192GB of RDIMM, 384GB of LRDIMM, or 768GB of 3DS LRDIMM DDR4 (288-pin) ECC memory with speeds of
up to 2666MHz in six memory slots
Note: Memory speed support depends on the processors used in the system.
DIMM Size
• Up to 128GB at 1.2V
Note: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
• Intel PCH C621 (X11SPM-F)
• Intel PCH C622 (X11SPM-TF/-TPF)
Expansion Slots
• One (1) PCI-Express 3.0 x8 Slot (CPU SLOT7)
• Two (2) PCI-Express 3.0 x16 Slots (CPU SLOT4, CPU SLOT6)
Network
• X11SPM-F: Marvell 88E1512 for 1G BASE-T Ports
• X11SPM-TF: Intel X557 for 10G BASE-T Ports
• X11SPM-TPF: Inphi CS4227 for 10G SFP+ Ports
• One (1) Dedicated IPMI LAN located on the rear I/O panel
Baseboard Management Controller (BMC)
• ASpeed AST2500 BMC
Graphics
• Graphics controller via ASpeed2500 BMC
Motherboard Features
To Next Page
Loading...
