Supermicro X11SPM-F - Page 56

56
Super X11SPM-F/-TF/-TPF User's Manual
Unit Identier Switch/UID LED Indicator
A Unit Identier (UID) switch and an LED Indicator are located on the motherboard. The UID
switch is located at JUIDB1, which is next to the VGA port on the back panel. The UID LED
(UID_LE1) is located next to the UID switch. When you press the UID switch, the UID LED
will be turned on. Press the UID switch again to turn off the LED indicator. The UID Indicator
provides easy identication of a system unit that may be in need of service.
Note: UID can also be triggered via IPMI on the motherboard. For more information
on IPMI, please refer to the IPMI User's Guide posted on our website at http://www.
supermicro.com.
UID Switch
Pin Denitions
Pin# Denition
1 Ground
2 Ground
3 Button In
4 Button In
UID LED
Pin Denitions
Color Status
Blue: On Unit Identied
+
PCB EDGE
PRESS FIT
1
1
DESIGNED IN USA
MAC CODE
X11SPM-F/-TF/-TPF
REV: 1.01
BAR CODE
Intel
PCH
JPV1
BT1
S-SGPIO1
S-SATA0
S-SATA1
S-SATA3
S-SATA2
JPH1
J18
COM2
JTPM1
JSTBY1
UID_LED1
LEDPWR
JIPMB1
JNVI2C1
JD1
JF1
JPI2C1
BMC_HB_LED1
LEDT2
LEDT1
LEDT3
LEDT4
JUIDB1
FANB
FAN5
FAN6
FAN2
FAN1
FAN4
FANA
FAN3
JPW1
SRW4
SRW3
JMD1
JSD1
JSD2
JRK1
JL1
JBT1
JPME2
JPUSB1
JWD1
JPG1
JPME1
COM1
VGA
LAN1/2
(-TF)
USB6/7
(3.0)
IPMI_LAN
USB0/1
JF1
NMI
X
LED
NIC1
X
LED
HDD
PWR
NIC2
OH/
FF
RST
ON
PWR
CPU1 SLOT7 PCI-E 3.0 X8
CPU1 SLOT6 PCI-E 3.0 X16
CPU
USB8/9(3.0)
USB10(3.0)
I-SATA4-7
I-SATA0-3
USB4/5
USB2/3
CPU1 SLOT4 PCI-E 3.0 X16
LAN1/2
(-F/-TPF)
DIMMC1 DIMMB1 DIMMA1
DIMMF1 DIMME1 DIMMD1
ASpeed
AST2500
Intel
X557
(-TF)
Inphi
CS4227
(-TPF)
Marvell
88E1512
(-F)
1
1. UID Switch
2. UID LED
2