EasyManuals Logo

Supermicro X11SPW-CTF User Manual

Supermicro X11SPW-CTF
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
Chapter 1: Introduction
Note: The table above is continued on the next page.
Motherboard Features
CPU
Supports an Intel® Xeon 81xx/61xx/51xx/41xx/31xx series (Socket P0-LGA3647) processor with a thermal design power
(TDP) of up to 205W and 28 cores
Note: The X11SPW-CTF/-TF motherboard does not support FPGA or Fabric processors.
Memory
Up to 192GB of RDIMM, 384GB of LRDIMM, and 768GB of 3DS LRDIMM DDR4 (288-pin) ECC memory with speeds of
up to 2666MHz in six memory slots
Note: Memory speed support depends on the processors used in the system.
DIMM Size
Up to 128GB at 1.2V
Note: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
Intel PCH C622
Expansion Slots
One (1) PCI Express 3.0 WIO Left X32 Slot
One (1) PCI Express 3.0 WIO Right X8 Slot
Network
Intel X557 10G PHY
Intel Ethernet Controller X722 for 10GBASE-T
One (1) Dedicated IPMI LAN located on the rear I/O panel
Baseboard Management Controller (BMC)
ASpeed AST 2500 BMC
Graphics
Graphics controller via ASpeed 2500 BMC
Motherboard Features

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supermicro X11SPW-CTF and is the answer not in the manual?

Supermicro X11SPW-CTF Specifications

General IconGeneral
BrandSupermicro
ModelX11SPW-CTF
CategoryMotherboard
LanguageEnglish

Related product manuals