Supermicro X13SCL-IF - D.3 Recovering the BIOS Block with a USB Device

Appendix D: UEFI BIOS Recovery
121
D.3 Recovering the BIOS Block with a USB Device
This feature allows the user to recover the main BIOS image using a USB-attached device
without additional utilities used. A USB ash or media drive can be used for this purpose.
However, a USB Hard Disk drive cannot be used for BIOS recovery at this time.
The le system supported by the recovery block is FAT (including FAT12, FAT16, and FAT32),
which is installed on a bootable or non-bootable USB-attached device. However, the BIOS
might need several minutes to locate the SUPER.ROM le if the media size becomes too
large due to the huge volumes of folders and les stored in the device.
To perform UEFI BIOS recovery using a USB-attached device, follow the instructions below:
1. Using a di󰀨erent machine, copy the "Super.ROM" binary image le into the disc Root "\"
directory of a USB ash or media drive.
Note: If you cannot locate the "Super.ROM" le in your driver disk, visit our website at
https://www.supermicro.com to download the BIOS package. Extract the BIOS binary
image into a USB ash device and rename it "Super.ROM" for the BIOS recovery use.