Supermicro X13SCL-IF User Manual

14
Super X13SCL-IF User's Manual
Note: The table above is continued on the next page.
Motherboard Features
CPU
•
Supports an Intel Xeon E-2400 or 12th Generation Pentium (V0 - LGA1700) processor with up to eight cores
Memory
•
Up to 64 GB of DDR5 ECC UDIMM memory with speeds of up to 4800 MT/s in two memory slots
Note: This motherboard supports 4800 MT/s with the one DIMM per channel population conguration.
DIMM Size
• 8 GB, 16 GB, 32 GB at 1.1 V
Note: For the latest CPU/memory updates, refer to our website at http://www.supermicro.com/products/motherboard.
Chipset
•
Intel C262 PCH
Expansion Slots
•
One PCIe 5.0 x16 Slot (Bifurcation: x16 or x8/x8)
• One M.2 PCIe 4.0 x4 Slot (from CPU, supports M-Key 2280 FF)
Network
•
Dual GbE I210 Gigabit Ethernet Controller
Super I/O
•
Aspeed AST2600
I/O Devices
•
One COM port on the rear I/O panel
• Two SlimSAS x4 connectors (two PCIe 4.0 x4 or one PCIe 4.0 x4 plus four SATA 6 Gb/s (RAID 0, 1, 5, 10))
• Two SATA 3.0 ports at 6 Gb/s
• One VGA port on the rear I/O panel
Peripheral Devices
•
Two USB 2.0 ports on the rear I/O panel (USB0/1)
• Two USB 3.2 Gen 1 ports on the rear I/O panel (USB2/3)
• One front accessible USB 3.2 Gen 1 header with two USB connections (USB4/5)
BIOS
•
256 Mb AMI BIOS
®
SPI Flash BIOS
• ACPI 6.0, Plug and Play (PnP), and SMBIOS 3.0 or later
Motherboard Features

Supermicro X13SCL-IF Specifications

General

Brand	Supermicro
Model	X13SCL-IF
Category	Motherboard
Language	English