Supermicro X13SCL-IF - 4.5 BMC

Chapter 4: UEFI BIOS
99
4.5 BMC
Use this feature to congure Baseboard Management Console (BMC) settings.
BMC Firmware Revision
This feature indicates the IPMI rmware revision used in your system.
BMC STATUS
This feature indicates the status of the IPMI rmware installed in your system.
System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled for all system event logging at boot up. The options are Disabled and Enabled.
Erasing Settings
Erase SEL (Available when "SEL Components" is set to Enabled)
Select Yes, On next reset to erase all system event logs upon next system reboot. Select
Yes, On every reset to erase all system event logs upon each system reboot. Select No to
keep all system event logs after each system reboot. The options are No, Yes, On next reset,
and Yes, On every reset.