Supermicro X13SCL-IF User Manual

3
Preface
Preface
About This Manual
This manual is written for system integrators, IT technicians and knowledgeable end users.
It provides information for the installation and use of the motherboard.
About This Motherboard
The Supermicro X13SCL-IF supports the Intel
®
Xeon
®
E-2400 or 12th Generation Pentium
processor in a V0 - LGA1700 socket with up to eight cores and a thermal design power
(TDP) of 95 W. Built with the Intel C262 PCH chipset, the X13SCL-IF supports 64 GB DDR5
ECC UDIMM memory with speeds of up to 4800 MT/s, SATA 3.0, M.2, and a Trusted Platform
Module (TPM) header. Note that this motherboard is intended to be installed and serviced by
professional technicians only. For processor/memory updates, refer to our website at http://
www.supermicro.com/products/.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation and to prevent
damage done to the components or injury to yourself:
Warning! Indicates high voltage may be encountered while performing a procedure.
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information given to di󰀨erentiate various models or to provide in-
formation for proper system setup.

Supermicro X13SCL-IF Specifications

General

Brand	Supermicro
Model	X13SCL-IF
Category	Motherboard
Language	English